Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$90.00
For over two decades, Terry has worked with all levels of riders and addressed all types of saddle comfort issues. Introduced in 1999, the Italian-made Butterfly represents the best in all that research and development. One of the best values you can buy in an Italian-made saddle, the Butterfly Cromoly is also one of the most popular saddles in the Terry line. Wider in the rear than typical race saddles for good support of a woman's sit bones; completely cut away through the nose and mid-section, making it flexible and comfortable against soft tissues; low profile, flat top with multi-density injection molded foam that's a bit stiffer in the rear for more power while pedaling; cromoly steel rails that allow us to save a few euro and make this variation a great deal. - Length x width: 262mm x 155mm - Weight: 326g / 11.5oz - Rails: FeC alloy - Cover/features: smooth Dura-tek with printed accents - Made in Italy
$17.00
TerraTrike's 10t Deluxe Idler is designed for quiet operation and uniform wear (original polyurethane version could flat-spot). Long-wearing black Delrin material with pre-installed sealed bearing. - 54mm OD, 8mm ID (bearing ID), 15mm wide - Standard OD for easy retrofit on older trikes with single or double slotted idlers - If you have a double slotted rear idler you will need two of these plus a spacer for replacement - OEM replacement part
$19.95
TerraTrike's 13t Deluxe Idler is designed for quiet operation and uniform wear. Long-wearing black Delrin material with pre-installed sealed bearing. - 63.5mm OD, 8mm ID (bearing ID), 15mm width - The larger OD of this idler may not fit older trikes or newer trikes in some locations - (best bet: replace your old idlers with the same OD replacement idler) - OEM replacement part
$45.00
The TerraTrike Comfort Pedal Conversion Kit is a great safety addition for your trike. Providing a comfortable foot support solution, they also allow for hands free entry. Specifically designed for recumbent trikes they are easily adjustable. - One pair is included in the kit. - Pedals not included - mounts to standard TerraTrike pedals. - One size fits most. - Convert standard pedals to pedals with heel support straps - Securely holds heel of foot when going over bumps - Fits TerraTrike and many other standard pedals - Easy sizing with straps
$150.00
This pedal set is perfect for the rider that needs ankle support in a completely secure pedal. It features a complete foot platform with a solid heel support. It also features 2 oversize straps with reflective strip and stainless steel ringlets that allow for a strong yet comfortable fit. A counterbalance on the bottom also assures the pedal will always remain upright for easier entry and exit. Perfect for special needs and motor control issues. Sold as a set of two. --Note: This pedal is not compatible with our Tandem Pro in the stoker position. The Tandem Pro captain position can utilize these pedals. - Replaces standard pedal - Counter-weighted so that the pedal is always in the same orientation - Reflective accents for visibility in low light conditions - One size fits most: for really small feet, consider our Pedal Platform w/straps kit
$15.00
Secure your Low Rider Rack with these trike specific mounting kits. Sold separately from the Low Rider Rack. - Fit Kit for Low Rider Rack - Fits: Rover - Includes all hardware for mounting Low Rider Rack to Rover trikes
$30.00
TRP Disc Brake Pads - Semi-Metallic, Steel Backed, For Hylex, Hylex RS, and HD-T190 Flat-Mount Calipers
$100.00
The Spyre is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine-tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 154g per caliper - Dual-sided actuation - Works with ALL cable-actuated road levers. Compressionless (linear strand) housing is highly recommended - Comes with TRP ultra-grippy semi-metallic pads - Calipers are compatible with Shimano M525/M515 pads - 160mm rotors recommended on front wheel - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only
$15.00
One of the coolest things about Surly is if they can't find an existing part that fits their standards, they just make one themselves. This cable hanger is made to fit around the oversize bolt on their Constrictor seatpost clamp so you can be sure it will fit around almost any other seatpost clamp bolt too. It comes complete with an adjusting barrel.
$12.00
Rear disc brake adaptor specifically designed ONLY for the Surly Troll, Ogre and ECR. - For use with 160mm rotor only - Brake caliper must be 74mm post mount compatible
$28.00
Surly's MWOD Inner Chainrings are made from stainless steel for extreme durability. These rings are compatible with Surly's MWOD cranks.
$45.00
- 7-speed SIS compatible Freewheel
$20.00
- Forged aluminum - 7/8-inch seat-clamp diameter - 165 grams
$25.00 - $30.00
• Square taper interface • Only includes left crank
$7.50
- DT Swiss cartridge bearings - Sold in pairs
$7.50
- With plastic washers - Shell: 8mm Allen head axle bolt
$15.00
- An economical replacement chain for 1 speed and 6/7 speed non-index shifting systems. - 1/2 x 1/8 - 300 grams
$45.00
- Forged steel body - Alloy cups - Chromoly spindle - Sealed bearings - Interface: English - Spindle Type: Square Taper JIS - Weight: 290-300 grams
$10.00
- Universal design - Use: Fits single rail
$35.00
Double your braking options with Sunlite's Type 1 Top-Mount Cross Levers. They fit neatly on top of your bars and they're a great way to gain more control on technical cyclocross courses and everywhere else you choose to ride. They're made of aluminum and boast a built-in reach adjustment.
$5.00
• Compatible with most side pull and center pull brakes • All weather compound
$65.00
- E-Bike-compatible 11-speed chain with Diamond Hard Coating which reduces wear and increases surface hardness - 4-edged chamfered outer plates provide improved shifting characteristics - Deep inner waist chamfer ensures quiet operations
$15.00
- Upper pulley has larger teeth for increased chain control
$90.00
- Shimano 105 R7000 Series CS-HG700-11 cassette - Average weight: 379g - Combination: 11-13-15-17-19-21-23-25-27-30-34T
$90.00 - $95.00
- Shimano 105 R7000 Series CS-R7000 11-speed cassette - Average weight: 284 g (11-28T), 304 g (11-30T), 320 g (11-32T), 269 g (12-25T) Combinations: - 11 – 28T: 11-12-13-14-15-17-19-21-23-25-28T - 11 – 30T: 11-12-13-14-15-17-19-21-24-27-30T - 11 – 32T: 11-12-13-14-16-18-20-22-25-28-32T - 12 – 25T: 12-13-14-15-16-17-18-19-21-23-25T
$90.00
Shimano 105 7000-series components offer much of the same technology and functionality as their top-level 11-speed drivetrains at a more budget-friendly price point. The RD-R7000 rear derailleur provides stable shifting performance and wide-range compatibility in two different cage lengths. The Shadow RD design limits the amount the derailleur sticks out from the side of the bike, reducing the risk of it making contact with objects and bending. - Maximum cog size: 30t (SS) / 34t (GS) - Total capacity: 35t (SS) / 39t (GS) - Pulleys: 11t - Chain compatibility: HG-EV 11-speed/HG-X11 - Direct mount compatible
$10.00
- Width: 5.8 mm - Drivetrain Speeds: 11 - Color: Silver - Reusable: No
$7.50
- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use
$25.00 - $35.00
Shimano ST-EF500 shift/brake lever provide an ergonomic, integrated solution for both brake and shifting controls. - Optical gear display - Adjustable reach - 4-Finger lever, compatible with cantilever, roller, linear-pull, and mechanical disc brakes
$45.00
- MODEL NO: CS-HG400-9 - SERIES: SHIMANO ALIVIO M4000 Series - Compatible chain: HG 9-speed - Speeds: 9-speed - Type: HG